Purchasing Air Scrubbers: A Buyer's Guide
Air scrubbers are machines that clean and aerate odorous
areas. They are commonly used to remove the odor of smoke after a fire, as well
as the bad odours that frequently accompany water damage. Chemicals, particles,
odors, and gases are cleaned from the air by commercial air scrubbers using a
tiny filtration system. Continue reading to learn how to obtain one.
Modern versions of these machines are designed to collect air
from their surroundings and circulate it through the channels, cleaning the air
and removing impurities as they do so. Negative air machines are another name
for air scrubbers. However, it should be noted that smaller units require
ducting, whereas industrial ones do not.
When should this type of unit be
used?
To guarantee that the property is dry and odor-free, you may
need to use commercial scrubbers in addition to your water damage repair
equipment. The smaller version of this equipment may be required if you are
doing a restoration operation that may generate or disturb hazardous particles
such as lead, dust, mold, or asbestos. You can select whether to use these
products based on the age of the property and the objects being dried.
How do you decide which of these
units is the best?
Several important factors must be considered when selecting
the finest product.
The unit of measurement for airflow is CFM (cubic feet per
minute). Air scrubbers come in capacities ranging from 500 to 2,000 CFM. Higher
CFM models are larger and heavier than lower CFM variants, and they may produce
more noise.
Speed: The bulk of these machines come in single and
multi-speed variations. When working in the field, it is beneficial to have
options for reducing the amount of noise produced by the work.
Filtering: Installing these devices is meaningless without a
filter system. These gadgets are typically outfitted with strong and efficient
air filters. HEPA air filters collect at least 99.97% of all airborne
particles.
Usage Instructions
Because an air scrubber is only intended to clean the air,
any surfaces that have been disinfected and cleaned after the machine has
completed its task may still require disinfection and cleaning. Disinfect the
entire device and replace the filters after each use to avoid
cross-contamination from one work to the next.
When transporting the unit to the job site, place it in the
center of the room. If you're operating in a larger area, you could need more
than one unit. It is preferable to use two smaller CFM units rather than one
large CFM unit to avoid stale air pockets that are not filtered. Using
industrial air movers in conjunction with an air scrubber, if practicable, will
result in maximum filtering.
To summarize
Air scrubbers not only generate a clean and healthy environment, but they
also limit the harm caused by harmful airborne contaminants in the equipment
and machinery of any particular property. To improve overall efficiency, a unit
that is ideal for your occupations and tasks should include all of the
qualities listed above.